If you are the original retail purchaser, it could still be under warranty. Musical Instruments & DJ Equipment. The first thing you’ll want to do is disassemble your guitar and you’ll want to do is remove the string from the guitar.
The primer should be applied in multiple thin coats.Similar to the primer, apply multiple thin layers of paint and allow each one to dry fully. I was the one who bought this guitar only to have it arrive damaged. You should also make sure the room you are painting in is open- don’t mess up your furniture.For the fun part, if you want a solid color, find a durable paint such as one with polyurethane or nitrocellulose which takes longer to dry.For a stained finish, use a water-based stain with a clear coat as well or choose an oil-based stain with oil-based finishes.
DM9's were braced real light and thus are more fragile then they look. Dry-fit your new neck on the guitar to make sure it sits flush. For all of you who may not know, fretnwail is a standup guy.
Be careful not to miss any scratches since they’ll be difficult to get out. Resonator Guitar - Guitars by Dean. Discover. Similarly, this should be done in multiple thin layers. If you’re using a simple acoustic guitar, a pickup or additional mic is needed. I just wanted to attempt the repair myself. You should also apply a few coats of primer before adding a new finish on your guitar and this should match the type of paint you’ll use.
First, you can remove the old finish completely or partially remove the finish by roughening it up and put fresh paint which will stick on the guitar.If you’ll use solid paint, you will only have to rough up the guitar surface but keep in mind that using a thick coat of paint could diminish your guitar.Using hand sandpaper will not do the job with ease completely which is why you should get your hands on orbital sandpaper. This could easily be done by clipping the strings away with a pair of clippers.Next, go ahead and take the neck of the guitar by undoing the bolts on it but if it doesn’t have the bolts on, you’ll have to do the refinishing with the neck glued to the rest of the guitar. This will come in handy when working on porous woods like mahogany.For the best results, I’d recommend that you settle for an oil or water-based filler that matches the paint you’ll be using.First, apply the mineral spirit to remove any oils on top of your guitar. I’d advise fitting it with coarse-grit sandpaper and sand the whole instrument using circular, smooth strokesEven after using a sander, there could still be finish on your instrument in which case you should have hand sandpaper to remove these.
Once the neck is undone, you’ll have to remove the guitar hardware next using either screwdrivers or an Allen wrench.After the disassembly, organize the parts well enough so that it won’t be a headache to put the guitar back together again.With all the hardware off, it should be easy to start the refinishing process. 5. Position the guitar neck so it sits flat against the top of the body and so the fretboard lays flush. While doing this, pay attention to the curved sections of your guitar and you could also use a coarse grit sponge to do the jobThe last thing you’ll want to do as far as removing the old finish is concerned is to do some fine sanding.
UPS already gave me refund. I'd try to get some payback from UPS first. If you have guitar related questions, use the "Search" field or ask the community. UPS did me the kind deed of smashing my Tacoma DM9. I bought it NOS off E-BAY in 2008, I think. 2. Acoustic Guitar reviews a a full-size dreadnought with a folding neck for easy storage and travel.. By Jeffrey Pepper Rodgers.
Prime Shopping-Basket. All in all, the short answer to your question is yes, you can plug your acoustic/electric guitar … This is best done using a finer grain of sandpaper. This could easily be done by clipping the strings away with a pair of clippers.
Make sure you get a new guitar neck that’s compatible with your type of guitar, or else it will not fit. You might be able to fix your bracing from the soundhole and you can repair cracks in the back from outside the guitar. An acoustic/electric guitar, however, is the same as an acoustic guitar but with electronics and a battery component so you can amplify it. Would it be s280.photobucket.com/albums/kk179/fretnwail ?